Technical Specification

Shower Infusion Starter Kit (for slide showers)
SUITABLE FOR:
-Slide shower installations.
OPERATING PRESSURE:
-Suitable for mains pressure only.
OPERATING TEMPERATURE:
-Maximum 70°C
CONNECTIONS
-All ½” BSP
 
Optimised for Methven Satinjet® products flowing at 9 litres per minute.

Tips to remember:

1. Check water pressure
-Shower infusions will only work with mains pressure
-If you have gas hot water, you have mains pressure
-Infusions will not work with low pressure showers

2. Infusion cartridges will last up to four weeks depending on:
-How often the shower infusions are used
-How many people use them
-How much infusion is used at once. Tip: put the switch only half way to start with and adjust up or down to suit
-How strong your water pressure is

3. There are two different product options - one for slide rail shower 01-01035 and one for a fixed shower 01-01034.

• Product Option available:
  • no adaptor (01-01035)