Technical Specification

• Suitable for all pressures (above 35kPa)
• Ceramic cartridge with Fastflow technology for unrivalled performance on unequal pressure
• High quality all-metal construction
• Performs exceptionally where the hot water temperature is limited by a tempering valve
• Concealed screws to attach faceplate
• Positive seal between the faceplate and wall
• Positive seal between the faceplate and body
• Pipe Connections 1/2" BSP (15mm) male
• The Fastflow unit is factory set for unequal pressure. Refer to installation instruction sheet for Fastflow modifications to suit equal pressure
• Operating Pressure
  Unequal Pressures
  
  • Hot Minimum 35kPa
  • Cold Minimum 300kPa
  Equal Pressure
  
  • Minimum 35kPa
  Recommended installation of a pressure limiting valve if supply exceeds 500kPa
• Operating Temperature
  Hot
  
  • Minimum 55ºC (at mixer)
  • Maximum 80ºC
  Cold
  
  • Minimum 5ºC
  NB: New Zealand Building Code Clause G12 - Water Supplies specifies all outlets used primarily for
  personal hygiene shall deliver water at a safe temperature
• Designed in New Zealand for New Zealand conditions

14 January 2012 — Product information is up to date