Kiri

3 Hole Wall Faucet

Product code: KIBWCP

• Suitable for all pressures (above 35kPa)
• 15mm 1/4 turn Ceramic Disc Headworks
• Slim Stream Shaper Aerator (flow director)
• Cast brass spout
• Foam gasket seal against wall
• O-ring seals on base
• Stainless steel flexible hose
• Hose end connections 1/2”BSP Male
• Standard mounting kit
• Operating Pressure
  
  • Minimum 35kPa, Maximum 1000kPa
  Unequal Pressures
  
  • Hot Minimum 35kPa
  • Cold 300 - 1000kPa
  Equal Pressure
  
  • Recommended 35kPa - 500kPa
  • Maximum 1000kPa
  Recommended installation of a pressure limiting valve if supply exceeds 500kPa
• Operating Temperature
  Hot
  
  • Minimum 55ºC (at mixer)
  • Maximum 80ºC
  Cold
  
  • Minimum 5ºC
  NB: New Zealand Building Code Clause G12 - Water Supplies specifies all outlets used primarily for
  personal hygiene shall deliver water at a safe temperature
• Designed in New Zealand for New Zealand conditions

• WELS Four Star rated on mains pressure (6.5l flow rate)
• WELS One Star rated on low pressure (13.5l flow rate)