Technical Specification

• Suitable for all pressures (above 35kPa)
• Low maintenance single function Satinjet shower
• Optimized to 9 l/m
• Easy-clean coating on faceplate
• Durable brass arm – never droops, never leaks
• Easy positioning with just one hand, no tightening required
• G1/2” female inlet threads on both showerhead and arm
• Operating Pressure
  
  • Minimum 35kPa, Maximum 500kPa
  Installation of a pressure limiting valve if supply exceeds 500kPa required
• Operating Temperature
  
  • Maximum 70ºC
  NB: New Zealand Building Code Clause G12 - Water Supplies specifies all outlets used primarily for
  personal hygiene shall deliver water at a safe temperature
• Designed in New Zealand for New Zealand conditions

• WELS Three Star rated on mains pressure (8.5l flow rate)
• WELS Three Star rated on low pressure (6.5l flow rate)

13 May 2012 — Product information is up to date