Technical Specification

• Suitable for all pressures (above 35kPa)
• Ceramic Cartridge headworks
• High quality all-metal construction
• Tubular swivel spout
• Integral flow restrictor to balance flows.
• Fitted with flow director and perlator
• O-ring seal on base
• Installed using stainless steel flexible hoses
• Hose end connections 1/2" BSP male
• Benchtop hole size 32mm diameter
• Operating Pressure
  
  • Minimum 35kPa, Maximum 1000kPa
  Unequal Pressures
  
  • Hot Minimum 35kPa
  • Cold 300 - 1000kPa
  Equal Pressure
  
  • Recommended 35kPa - 500kPa
  • Maximum 1000kPa
  Recommended installation of a pressure limiting valve if supply exceeds 500kPa
• Operating Temperature
  Hot
  
  • Minimum 55ºC (at mixer)
  • Maximum 80ºC
  Cold
  
  • Minimum 5ºC
  NB: New Zealand Building Code Clause G12 - Water Supplies specifies all outlets used primarily for
  personal hygiene shall deliver water at a safe temperature
• Designed in New Zealand for New Zealand conditions

• WELS Four Star rated on mains pressure (7.5l flow rate)
• WELS Five Star rated on low pressure (6l flow rate)

13 January 2012 — Product information is up to date