Technical Specification

• Suitable for mains pressure only
• Used where a single outlet only needs to be controlled
• Includes:
  • Single outlet thermostatic mixer valve
  • Single outlet metal trim kit
• Features:
  • Discreet low profile installation
  • Easy to use large rotary control temperature setting with grip ring
  • Easy to use lift lever flow control
  • Designed in New Zealand for New Zealand conditions

• Flow rate – varies depending on inlet pressure and type of device attached to outlet (no integral flow restriction)
• Installation Notes:
  • Water inlets- ¾” BSP Female
  • Water outlet ¾” BSP Female
• Operating Pressures
  • Minimum 150kPa, Maximum 500kPa
  • Methven recommends the installation of a pressure limiting valve if supply exceeds 500kPa
• Operating Temperatures
  • Hot - Minimum 55ºC, Maximum 80ºC
  • Recommended 60-65ºC
  • Cold - Minimum 5ºC
  • Mixed - Maximum   47ºC 
  • Other - Minimum temperature differential between either supply and mixed blend - 12ºC

• Notes: 
  • After installation all connections must be checked for leaks.
  • All installations must be carried out in compliance with relevant water regulations.

16 May 2012 — Product information is up to date