Kaha

3 Hole Wall Mounted Mixer

Product code: KAHA 122B

KAHA 122B – Kiri 3 Hole Wall Mounted Mixer with Backplate

• Suitable for all pressures (above 0.35 bar)
• Includes:
  • Cast brass spout
  • Welded brass and copper inlet body
  • Metal trim plate and handles
• Features:
  • 15mm 1/4 turn Ceramic Disc Headworks
  • Slim Stream Shaper Aerator (flow director)
  • Quick fit adaptor on spout
  • Foam gasket seal against wall
• Flow rate - 7 L/Min
• Installation notes:
  • Inlet connections 1/2”BSP Male (compression nut fittings supplied)
• Operating Pressures:
  • Minimum 0.35 bar, Maximum 10 bar
  • Recommended  0.35  bar – 5 bar
  • Methven recommends the installation of a pressure limiting valve if supply exceeds 5 bar
• Operating Temperature
  • Hot - Maximum 80ºC
  • Cold - Minimum 5ºC

• Notes:
  • After installation all connections must be checked for leaks.
  • All installations must be carried out in compliance with relevant water regulations.